Space Tone 6V6se
      Specifications & Manual

  • 5W CLASS A ~ Even Order Harmonics - BIG TONE!
  • Single-Ended Output - Zero Negative Feedback
  • JJ 12AX7 - T-S, JJ6V6S - JJ GZ34 Rectifier
  • Can sub 6L6 Family ~ 5Y3 for Sag & Earlier Break
  • 100% Tube Circuit - Valve Rectifier - No SS diodes!
  • -3dB Negative Feedback Switch (toward controls is activated)
  • Point to Point Hand Wired Circuit
  • Cathode Biased (no need to bias)
  • Cloth Hook-Up Wire
  • Heaters referenced to ground
  • Swart Amplifiers employ Star Grounding
  • 1/4" Out on Chassis - Drive External Speaker/Cabinet
  • Drives 4 or 8ohm Speaker or Speaker Cab
  • Switchcraft 1/4 inch input and output
  • CTS Potentiometers
  • Fuse Protected ~ now 1A Slow Blow
  • Speaker:  Weber Ceramic Signature 8 ~ 4 ohm
  • Finger-Jointed Pine Cab ~ Beautiful Lacquered TWEED
  • Dimensions: 13 3/4T x 13W x 7 1/4 D  ~ 14lbs

    ***NOTE: Fuse now 1A Slow Blow Long Fuse
               
           Was 2A but changed to 1A

 

 

see Space Tone Tweed 6V6se


6V6SE heart and soul - 100% Class A - ALL Tube Circuit - Point to Point Wiring - Heyboer Iron -
Carbon Comp Resistors - Mallory, Atoms, & JJ Caps - Cloth Covered Wire - Tube Rectification - No Solid State ALLOWED!

 

 


©2003-2020  swart amplifier co.         2031 wrightsville ave wilmington nc        910.620.2512       info@swartamps.com      design & hosting by i-vol: web design - editing - photography - hosting