ALL TUBE - TUBE REVERB - TUBE TREMOLO


This was really a limited edition run of our legendary AST combo but in a custom made head cabinet to allow us to drop the AST COMBO chassis into a HEAD CAB. This was known as the AST Head Mk I.  We only made about @ 26 of these but a few prior made combo might have made their way into this cab before we put a stop to the design. Years later, a few dark samples were made as pictured at bottom, perhaps only two. 

We later came out with the Mk II head with different output transformer allowing for 4-8-16ohm taps along with a new master volume.  But for those looking for the original AST vibe, this was the way to get this sound/take into a head form.  But this really is literally the AST combo amp.

So it's the combo's 8ohm output transformer but truth be told, it can push a 16ohm load and sound pretty sweet with some great tone doing it.  Running a 16ohm Blue, Ruby, Cream even sounds pretty cool.  But obviously for best matching and output, 8ohm recommended. 

***NOTE: Always make sure to have a LOAD PLUGGED into OUTPUT or risk damage to output transformer

- kh

FULL SIZE VIEWS
- Click above for full size views of front and back

OR SCROLL DOWN BELOW

 

See full size - Atomic Space Tone Amplifier

 

 

Specifications

  • All Tube circuit ~18-20w twin 6V6 High Biased AB
  • Can be powered by MATCHED 6V6 or 6L6 (No KT66)
  • Cathode "AUTO" Biased (no need to bias )
  JJ/Tung-Sol 12AX7(2) - JJ 12DW7 - JJ 6V6/6L6 - JJ GZ34
  • Tube Rectification ~ GZ-34 or NOS 5Y3 (See below)
  • Sub NOS 5Y3 for earlier breakup/compression
  • 100% Tube Reverb & Tremolo ~ Spring Tank (bag at bottom)
  • Hi/Lo Inputs for better PU Output matching
  • Hand wired point to point ~ Made in USA
  • Standby Switch
  • Carbon Comp Resistors for BEST TONE
  • Mallory, Sprague, and JJ Caps selected for Application
  • Finest silver tinned cloth & Teflon covered wire
  • 8 Ohm High Quality Custom Output Transformer
  • Dedicated 2 button foot switch included (TRS Cable)
  • Rubber Feet for Vibration/Protection
  • Solid, finger-jointed Cabinet ~ Lacquered Tweed
  • Can push 8 or 16ohm cabinet - Likes sensitive speakers
  • FUSE: 1A Slow Blow 250v 3AG 1/4 x 1-1/4(30mm)
  • Dimensions: 17 ½ X 9 ½ X 8 ¾   ~ 20lbs



 

A few AST MK I were made in DARK TWEED
above and beyond the 26 original run of light


©2004-2023 swart amplifier co.     2031 wrightsville a ve wilmington nc      910.620.2512      info@swartamps.com      design & hosting by i-vol: web design - editing - photography - hosting