Such a great upgrade over the stock switch and made in our shop. Once you use this, you never go back to the old.

• Designed & Built at Swart Shop
  
  
• LED off/on Status for Reverb/Tremolo
  
  
• Tremolo Speed Display via LED!
  
  
• Powered or 9V Battery Option
  
  
• Stereo Jack for any length
  stereo (TRS) ¼ cable ~ Or
  include our Swart 15ft TRS
  RapcoHorizon Option
  
  
• Made in Wilmington, NC

Note this does need a TRS (stereo) Cable to work properly for BOTH. A regular cable will leave one unworking.

Can be powered by the internal 9V battery that lasts quite a long time, many months if not left on. 9V power option does exist but we use the battery.

NOTE: Only Reverb/Space LED light works when unplugged.

**The TREMOLO off/on and speed LED NEEDS FS TO BE PLUGGED into the AMP with Tremolo switched ON and the depth up.

This fools many to think the switch is not working if unplugged. The AMP's Tremolo circuit DRIVES the LED, thus will light with speed frequency when plugged in. Not plugged in (or no depth) equals no LED tremolo light.